14-day free trial

For sidewall belt producers, OEMs & system integrators

From project data to a reliable belt design — in minutes, not days.

Sidewall Belt Designer Pro turns your conveyor parameters into a complete, rule-checked belt configuration — so you can quote faster and design with confidence.

14-day free trialBook a walkthrough
  • No credit card required
  • 14-day free trial
  • Cancel anytime
Sidewall belt with corrugated sidewalls and cross cleats for steep-incline conveying

Sound familiar?

  • Every inquiry waits in line until the one person who can size a sidewall belt has time.
  • The sizing logic lives in a spreadsheet that only its author fully understands.
  • Two engineers, two answers — the design rules exist in one person’s head, not in a system.
  • Your most experienced engineer spends hours on routine sizing instead of the hard problems.

Three steps to your design

  1. Enter project data

    Conveyor geometry, capacity, incline and boundary conditions.

  2. Configure the belt

    Choose class, inset and cleat pattern, or let the tool suggest one.

  3. Get your result

    A checked design as a result card and a one-page PDF datasheet, ready for your quote.

What you gain

Speed

Minutes instead of days — quote while the inquiry is still hot.

Consistency

Same input, same rules, same result — for every engineer, every time.

Engineering confidence

Built-in design rules (e.g. cleat pitch) flag risk before it ships.

Commercial advantage

Respond faster than competitors still doing this by hand.

A result ready for your quote

Here is what a design result looks like — a checked result card and a one-page PDF datasheet.

Example result
Recommended base belt
EP 630/4
Effective tension at drive
18,4 kN
Motor power (recommended)
7,5 kW
Min. pulley diameter
500 mm

Plus a one-page PDF datasheet — ready for your quote.

Simple, fair pricing

Monthly
€299 per month
2 months free
Yearly
€2,990 per year
the equivalent of 2 months free compared to paying monthly

14 days free, no credit card

14-day free trial

No credit card. Cancel anytime.

Frequently asked questions

Do I need a credit card for the trial?
No. You start with just an email confirmation — no payment details required.
What happens after the 14 days?
Without an upgrade, access simply pauses. Your account stays in place for 90 days in case you decide to upgrade later — your project calculations themselves are never stored anyway (see next question).
Is my project data safe? Where is it stored?
Your project data is not stored at all. Each calculation runs directly on our server in Germany and the result is returned to you immediately — nothing is saved, and nothing is shared with third parties.
Can I cancel anytime?
Yes. Cancel directly from your account; access continues until the end of your paid period.
Which belt types are covered?
The standard sidewall belt classes with cleat/sidewall combinations and pocket geometry, used for steep-incline and vertical conveying.
Can my whole team use it?
Your subscription covers your company. If several colleagues need individual logins, just get in touch and we will set that up.
Do you show the underlying formulas or design methodology?
No. For IP reasons, we only show inputs, result values and drawings — never the formulas or derivations behind them.
What happens if I hit the daily limit during my trial?
The trial allows up to 25 designs per day — enough for normal project work. The limit resets automatically the next day.

Sidewall Belt Designer Pro

Ready to quote faster?

Start now — your first rule-checked design is only minutes away.

14-day free trialBook a walkthrough
  • No credit card required
  • Project data is never stored
  • Cancel anytime